M605C — Audio Distribution Amplifier

M605C AUDIO DISTRIBUTION AMPLIFIER Ga in: +18 to -6 dB continuously variab]e (Bridging Ga in) . Frequency Response: +0.2 dB from 20 Hz to 20 kHz . No ise: at maximum ga in : at unity ga in: 70 dB be low +8 dBm _ 85 dB below +8 dBm (20 Hz to 20 kHz ) L Harmonic Distortion: Less than 0 .

1% THD from 20 Hz to 20 kHz up to +24 dBm output Teve] with 4 isolated outputs s imultaneously driven . Input Level : -10 dBm to +14 dBm nomina 1 for +8 dBm output , +24 dBm maximum a t unity ga in. Input Impedance: 30 , 000 ohms or greater , ba ]anced . Source Impedance: 600 ohms or Tess , ba lanced .

Common Mode Rejection: 65 dB or greater _ Output Level : +8 dBm nomina ] . +24 d Bm maximum a t each output , up to 4 outputs maximum_ Output Impedance: 150 ohms resistive at each output, actively ba Ianced _ Load Impedance: 150 ohms ba Tanced for each isolated output_ Tota 1 minimum Toad impedance a t DIRECT output not to be Tess than 75 ohms _ Output Isolation: Phas ing : 45 dB or greater (30 Hz to 35 kHz ) The Tow termina ] number 0 f the input pa ir and the Tow termina ] number 0 f the output pa ir are in phase.

Power Requirements : 115 volts ac +10 % , 6 0 Hz , 20 VA _ Ambient Temperature: 0 to 60 degrees Celsius _