POD3 — Stereo Level VU Meter

Frequency Response: ±1.0 dB, 20 Hz to 20 kHz Maximum Input Level: at 0 dBu: +21 dBu at + 4 dBu: +25 dBu at +8 dBu: +29 dBu Stereo Separation: Greater then the meters resolution Sensitivity Range: 0 dBu to +8 dBu for a 0 VU reading Input Impedance: 30,000 Ω or greater, balanced Source Impedance: 600 Ω or less, balanced Common Mode Rejection: Greater than 70 dB at 60 Hz Meter Ballistics: Comply with ANSI C165 Power Requirements: 110 or 220 Volts ac, 60 or 50 Hz, 12 VA Ambient Temperature 0°to 50° Celsius Dimensions 8.69" wide x 1.73" high x 7.0" deep

FROM 110 VOLTS ac:

■ Two jumpers must be present, one connection Y1 to Y2, the other connection Y3 and Y4. This corresponds to JP2 and JP3 being in place.

FOR

FROM 220 VOLTS ac:

■ One jumper must be present, connecting Y2 and Y3. This corresponds to JP1 being in place.

Frequency Response: ±1.0 dB, 20 Hz to 20 kHz. Maximum Input Level: +21 dBu, balanced. Stereo Separation: Greater than the meter's resolution

Range: 0 dBu to +8 dBu for a 0 VU reading.

Input Impedance: 30 000 ohms or greater, balanced.

Source Impedance: 600 ohms or less, balanced.

Common Mode Rejection: Greater than 70 dB at 60 Hz. Power Requirement: 110 or 220 volts ac, 60 or 50 Hz; 5 Watts.

Ambient Temperature: 0o to 50o Celsius.

Relative Humidity: 20 % to 90 %, non-condensing.

Dimensions: 8.69" wide x 1.73" high x 7.00" deep (221 mm x 44 mm x 178 mm)

Also: operation boilerplate (5 devices)