AMS8-1CAM — Mkiii 8 Channel Audio Monitoring System

* As of August 2018, the Analog Audio output connector has been redesigned to be a DB25 female connector with Tascam pinout.

ANALOG OUTPUT

Frequency Response 1.5 dBu from 20Hz to 20kHz Impedance 60Ω Balanced Max Output 23.5 dBu Noise Less than -70 dBu THD Less than 0.05% Connector Type DB25 female*

AES/EBU INPUTS

AES/EBU OUTPUTS

MONITOR OUTPUT

HEADSET JACK

THD ¼ inch

POWER

Input 90-230 VAC,50-60 Hz

Also: specs boilerplate (6 devices) · specs boilerplate (6 devices) · specs boilerplate (7 devices) · specs boilerplate (56 devices)

There are eight illuminated pushbutton switches arranged in two rows of four. The upper row of white buttons designated MONITOR selects the source to be monitored. Buttons 1/2, 3/4, 5/6 and 7/8 select the appropriate displayed audio pair for monitoring. The lower row has three grey buttons labelled AES and Embedded 1-8 and 9-16. These allow the user to select the type of signal they would like to monitor. Pushing the AES button routes the bank of either the 75 or 110 Ohm AES inputs to the meter for monitoring. Selecting the 75 or 110 Ohm bank of AES inputs is determined in the initial setup of the unit. The AMS8-1CAM has been shipped with the 75 Ohm AES bank already selected. Pushing the Embedded 1-8 buttons extracts the first 8 channels (2 groups) from an 3G/HD/SD-SDI signal. Pushing the Embedded 9-16 extracts the last 8 channels (2 groups) from a 3G/HD/SD-SDI signal. The lower row also has one yellow button labelled SUM; when pushed, this allows the operator to mix any of the four sources available on the meter by pressing the appropriate pair buttons from the top row of monitor sources.

The two control knobs designated SELECT and VOLUME are rotary shaft encoders with integral push switches. The VOLUME button adjusts the listening level of the unit’s integral speakers. Depressing the VOLUME knob mutes the speakers. To cancel the mute, depress the VOLUME knob again. The SELECT rotary shaft encoder is used during the initial setup of the unit.

AMS8-1CAM CONNECTER LAYOUTS

DISPLAYS

Eight 22 segment LED bargraph meters display VU and Peak Program information simultaneously. A reference LED (red) at the zero mark is continuously illuminated. The ERR LED indicates an alarm.

An eight-character dot-matrix display located above the SELECT and VOLUME controls to display signal parameters and status information. This display also assists the user in making input selections

(only shared text)

Also: warranty boilerplate (67 devices) · warranty boilerplate (67 devices) · warranty boilerplate (67 devices) · warranty boilerplate (67 devices) · warranty boilerplate (67 devices) · warranty boilerplate (67 devices) · warranty boilerplate (67 devices) · warranty boilerplate (67 devices) · warranty boilerplate (67 devices) · warranty boilerplate (67 devices) · warranty boilerplate (67 devices) · warranty boilerplate (68 devices)

(only shared text)

Also: warranty boilerplate (67 devices) · warranty boilerplate (67 devices) · warranty boilerplate (67 devices) · warranty boilerplate (67 devices) · warranty boilerplate (67 devices) · warranty boilerplate (67 devices) · warranty boilerplate (67 devices) · warranty boilerplate (67 devices) · warranty boilerplate (67 devices) · warranty boilerplate (67 devices) · warranty boilerplate (67 devices) · warranty boilerplate (68 devices)