D6201B — Dual 1 x 4 AES/EBU Distribution Amplifier - 75 Ohm With SRC

Card Info (Read Only) Product D6201B Product identification code

Name Dual Unbalanced AES Distribution Amplifier Product functional description

Supplier Ward-Beck Systems Inc. Manufacturer of the card

Software Rev. ## Three digit software revision code

Web site www.ward-beck.com Manufacturer’s web address EQ 2 Yellow Sixth from the top When illuminated this indicates that the cable EQ for AES 2 has been inserted by pressing SW2 or that feature has been enabled through Dashboard. Com Activity Green Seventh from the top When illuminated this indicates that the D6201B is communicating to Dashboard through the CAN bus. Error Red Eighth from the top When illuminated this indicates that there is an error in the communications to Dashboard through the CAN bus. Card Status (Read Only) Card Status Green Dot - OK Card is functioning properly and appropriate signals are connected

Red Dot - No AES signal detected AES signal is not present at either input

AES Input 1 Locked AES signal is present

Unlocked AES signal is not present

AES Input 2 Locked AES signal is present

Unlocked AES signal is not present

MENU ITEM DISPLAY

Card Settings (Button selection) Mode 1 x 8 Functions as a 1 in 8 out AES DA

1 x 4 Functions as dual 1 in 4out AES DA

1 x 8 w/SRC Note: Using this feature disables tone generation. Functions as a 1 in 8 out AES DA with Sample Rate Conversion. A sampling signal must be connected to AES input 2 or jumpers on card may be set to select between AES2 or frame reference 1 or 2

AES INPUT 1 MENU ITEM DISPLAY

Card Settings (Button selection) Mode 1 x 8 Functions as a 1 in 8 out AES DA

1 x 4 Functions as dual 1 in 4out AES DA

1 x 8 w/SRC Note: Using this feature disables tone generation. Functions as a 1 in 8 out AES DA with Sample Rate Conversion. A sampling signal must be connected to AES input 2 or jumpers on card may be set to select between AES2 or frame reference 1 or 2

AES INPUT 2 MENU ITEM DISPLAY